Product Overview

      The CS series jaw crusher is a new type of jaw crusher that is designed and manufactured by our company based on the introduction of international leading jaw crusher technology and our company's decades of accumulated jaw crusher design concepts and technologies. It is optimized in terms of structure, material selection, process, and equipment, etc. Its mechanism is unique, and its performance is superior. It is the preferred equipment for crushing various hard and highly abrasive rocks and minerals. This jaw crusher can also adopt a modular, weld-free, split-type frame structure according to customer needs, thereby meeting different working conditions.

Product Features

1. Robust Structure

      The frame is divided into two types: welded and assembled. Small and medium-sized specifications generally use welded frames, while large specifications generally use assembled frames. The welded type adopts a large-radius transition fillet and low-stress zone welding method, which greatly reduces stress concentration, ensures the uniform strength of the frame in all directions, and has the characteristics of impact resistance, uniform stress, and low failure rate. The assembled type adopts an advanced modular, weld-free frame structure design, with high fatigue strength and high reliability. At the same time, the entire machine's assembled design makes transportation and installation more convenient, especially suitable for installation in small and difficult-to-transport places such as underground mines and high-altitude mines.

2. Superior Cavity Design

      It adopts a "V"-shaped symmetrical crushing cavity design, making the actual feed port width consistent with the nominal feed port width. The crushing chamber is deep, the nip angle is small, and the stroke is large, resulting in higher capacity, lower energy consumption, and better crushing performance.

3. Durable Heavy-duty Swing Jaw Assembly

      The heavy-duty swing jaw assembly adopts a forged heavy-duty eccentric shaft, high-quality heavy-duty rolling bearings, and a swing jaw body optimized by FEM analysis, ensuring high impact resistance and stability of the swing jaw assembly; the labyrinth seal and centralized lubrication system ensure that the bearing grease is not contaminated, making lubrication more convenient and resulting in longer running time and better stability.

4. Swing Jaw Guard Plate Design
      A heavy-duty guard plate is installed above the swing jaw to effectively protect the swing jaw body and its internal bearings from damage caused by material impact.
5. Convenient and Quick Particle Size Adjustment
      The CS series jaw crusher uses a mechanical or hydraulic discharge port adjustment device. Its double wedge block adjustment method, compared with the corresponding pad adjustment, is simpler, safer, faster, and saves downtime.
6. "Large-Specification Bearing" Design
      The "large-specification bearing" design provides high load-bearing capacity, longer lifespan, and safer and more reliable use.

7. Spring or Hydraulic Cylinder

      The swing jaw tightening device adopts a hydraulic or spring-screw structure. The spring-screw structure adopts an advanced friction-reducing device, making adjustment easy and quick.
8. Integral Bearing Housing
      The integral cast steel bearing housing structure ensures perfect matching with the frame, avoiding unnecessary radial loads on the bearings during the fastening process of the combined bearing housing, making the bearing operation smoother.
9. Integrated Motor Installation
      The integrated installation of the motor seat and the crusher frame not only saves installation space for the jaw crusher and reduces the length of the V-belt, but also, due to the synchronous movement of the frame, motor seat, and motor, and the adjustable motor seat achieves adjustment of the V-belt tension, thus prolonging the service life of the V-belt.

10. Shock Absorption Installation Design
      The crusher is fixed using a special rubber shock absorber, which effectively absorbs the equipment's vibration peaks and allows the crusher to move in the vertical and longitudinal directions, thus reducing the impact on the foundation.

Technical Parameters

Specification Model	Feed Opening Size (mm)	Maximum Feed Size (mm)	Capacity (t/h) at Tight Side Discharge Opening Size (mm)
			40mm	50mm	60mm	70mm	80mm	90mm	100mm	125mm	150mm	175mm	200mm	225mm	250mm	275mm	300mm
DHC80	800*510	430	50-70	55-85	80-100	90-125	110-145	120-170	135-185	170-240	200-280	240-330
DHC96	900*600	500		90-130	105-140	115-165	135-185	150-200	170-240	200-270	230-300	275-345
DHC100	1000*800	700				120-170	140-195	155-215	175-255	210-300	250-350	300-420	340-480
DHC110	1100*850	720				180-240	200-265	220-295	245-320	300-385	350-455	400-520	460-590
DHC125	1250*950	850							270-360	325-430	385-505	445-580	500-650	560-725	620-800
DHC145	1450*1100	1000								360-470	425-555	490-640	555-725	625-815	690-900	725-985
DHC160	1600*1200	1020									490-640	560-730	635-825	710-920	780-1010	855-1105	930-1200
DHC210	2100*1600	1360										800-880	900-1005	1000-1125	1100-1225	1200-1375	1300-1500

Application Range

Mine beneficiation

Building materials and cement processing

Water conservancy and hydropower materials

Highway pavement

Railway materials

Coal processing

Construction sites

Garbage disposal

Applicable materials

Basalt

River pebbles

Granite

Construction waste

Quartz stone

Iron ore

This jaw crusher features a unique structure and superior performance, making it the preferred equipment for crushing various hard and highly abrasive rocks and minerals.